STEPPERONLINE Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

Brand: STEPPERONLINE
Product Code: DM542T
Availability: 100
$30.25

5 or more $28.66
10 or more $27.07
50 or more $25.48
100 or more $23.88

Available Options

Qty

Ask a question / Notify inventory
   0 reviews  |  Write a review

100% brand new from STEPPERONLINE (The No 1 distributor in the world for stepper motors and drivers).

The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542T can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM542T an ideal choice for high requirement applications. It is highly recommended to work asnema 17 driver and nema 23 driver.

Key Features:

  • Input voltage 20-50VDC
  • 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
  • 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • Soft-start with no “jump” when powered on
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors, works well as nema 17 driver, nema 23 driver
  • Support PUL/DIR mode
  • Over-voltage and over-current protections
Resources:

Physical Specification
Weight(g) 210
Stepper Driver Specification
Input Voltage(V) 20 - 50
Output Current(A) 1 - 4.2
Microstep(Steps/rev.) 400 - 25600
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha